Roofing Services in Lincroft, NJ
Lincroft Roofing & Maintenance offers a complete range of roofing services in Lincroft and Rochelle Park, Stratford, Whitehouse Station, Berkeley Heights, Clinton. Every job gets the same attention. Big or small.
Roof Replacement
After tear-off, we always check decking and replace what's needed. Soft spots mean moisture intrusion. The old roof was leaking longer than you realized. We use 7/16" or 15/32" CDX plywood depending on rafter spacing. New decking costs $75-$120 per sheet installed. We only replace what's actually damaged.
Get a Free Quote →
Roof Repair
Improper step flashing is the leading cause of roof leaks at wall-to-roof transitions. Step flashing needs to be woven between shingle courses with each piece extending 4" above the shingle exposure. We see Lincroft homes where the last roofer used continuous L-flashing or just caulked the gap. That always fails. We tear it out and install proper step flashing with a kick-out diverter at the bottom per IRC R905.2.8.3.
Get a Free Quote →
Storm Damage Repair
We handle storm damage claims from start to finish: inspection, documentation, claim filing, adjuster meeting, supplement if needed, repair or replacement, and final inspection. Our supplement team has recovered thousands in additional coverage for Lincroft homeowners that adjusters initially missed.
Get a Free Quote →
New Roof Installation
We handle new construction from permits through final inspection. Our Lincroft office coordinates with your builder on scheduling, material delivery, and inspection timing. Typical install time is 1-3 days depending on size and complexity.
Get a Free Quote →
Metal Roofing
We install 24-gauge and 26-gauge steel standing seam panels in Galvalume and pre-painted finishes. Concealed fastener clips allow the panels to expand and contract with temperature changes without stress on the fasteners. That's why standing seam doesn't leak. The clips float.
Get a Free Quote →
Shingle Roofing
Architectural shingles are what we install on 90% of Lincroft homes. They're thicker, heavier, and more wind-resistant than the old 3-tab flat shingles. They also look dramatically better. Dimensional profiles that mimic wood shake or slate. Standard architectural shingles carry a 30-year warranty. Premium versions go to 50.
Get a Free Quote →
Flat Roofing
PVC membrane for Lincroft restaurants, commercial kitchens, and facilities with rooftop grease exhaust or chemical exposure. PVC resists oils and animal fats that destroy TPO and EPDM membranes. We install IB Roof Systems and Duro-Last PVC with factory-fabricated accessories for watertight penetration details. Built-up roofing (BUR) uses 3 or 4 plies of fiberglass felt in hot asphalt with a gravel or cap sheet surface. Oldest proven flat roof system, with 30+ year service life in New Jersey. We still install BUR when the application calls for it.
Get a Free Quote →
Commercial Roofing
Need a commercial roof coating? Silicone coatings over existing TPO, EPDM, or metal extend life 10-15 years for a third of replacement cost. Not every roof qualifies. The existing membrane needs to be in decent shape. We core sample and moisture scan to verify before we recommend it.
Get a Free Quote →
Gutter Installation
Gutter replacement in Lincroft costs $8-$15 per linear foot installed. That includes hangers, end caps, outlet drops, miters, and at least two downspout runs. Copper is $25-$40 per foot. We give exact pricing in the estimate. No ranges.
Get a Free Quote →
Roof Inspection
Our inspection covers the roof and the attic. From the attic, we check for daylight through the roof deck, moisture stains on rafters, mold on sheathing, and ventilation function. Problems in the attic often indicate roof issues that aren't visible from the surface.
Get a Free Quote →
Emergency Roof Repair
We don't charge extra for emergency tarp jobs. The tarping cost is rolled into the permanent repair price. If you need us at midnight during a storm, the price is the same as a Tuesday afternoon.
Get a Free Quote →
Skylight Installation
VELUX FS (fixed) and VS (vented) skylights installed with EDL flashing kits for shingle roofs. The multi-step flashing integrates with the surrounding shingle courses per IRC R903.2. We frame the curb with doubled 2x8 or 2x10 lumber (depending on rafter depth), install ice and water shield membrane around the entire curb perimeter, then set the skylight with factory sealant before weaving step flashing into the field. Top headwall flashing tucks under the upslope shingle course. Bottom sill pan diverts water onto the downslope shingles. Zero exposed sealant joints. Mechanical flashing only.
Get a Free Quote →